SAE AS23053 | M23053/8 2:1 Kynar Heat Shrink Tubing
Shrinkage Ratio:
50% (2:1) @ 175ºC
Longitudinal Shrinkage:
-10% (max.)
Operating Temp Range:
-55ºC to +175ºC, intermittent up to 350ºC
Dielectric Strength:
800 V/mil
UL Rating:
600V @ 150ºC
Volume Resistivity:
1013 ohm-cm (min.)
Specific Gravity:
1.8 (max.)
Tensile Strength:
5000 psi
Ultimate Elongation:
150% (min.)
Vacuum Outgassing:
TML, %; 1.0 (max.)
CVCM, %; 0.1 (max.)
Categories
- ►Wires (3)
- ►Video (1)
- ►Custom Cable (1)
- ►Cables (15)
- ►Testimonials (1)
- ►Braid (3)
- ►Connectors (38)
- ►1 Connectors (1)
- ►Connectors: Rack and Panel (3)
- ►Connectors: 26482 Series (2)
- ►24308 Series: ITT Cannon MIL-DTL-24308 (1)
- ►Connectors: 26500 Series (3)
- ►Connectors: 348 Series (2)
- ►Connectors: 5015 Series (2)
- ►Connectors: Omega Series Receptacles (2)
- ►Connectors: Molex Industrial Products (1)
- ►Connectors: ModICE® Sealed Enclosures (2)
- ►Connectors: M8 and M12 Products (2)
- ►Connectors: ECG Connectors and Convenience Outlets (2)
- ►Connectors: D38999 Series (3)
- ►Connectors: Amphenol Sine (2)
- ►Connectors: Additional Connectors (1)
- ►Connectors: 83723 Series (2)
- ►Connectors: 67/165 Series (2)
- ►Connectors: RF (2)
- ►Connectors: Wire Pro Connectors (2)
- ►1 Connectors (1)
- ►Cable Harness Management (77)
- ►Cable Ties MS3367 (1)
- ►Molded Shapes (65)
- ►4-Way & Up Outlet Shapes (5)
- ►3-Way Outlet Shapes (4)
- ►Miscellaneous Heatshrink Shapes (5)
- ►Adhesive Options (1)
- ►Right Angle Heatshrink Shapes (7)
- ►2100 Series Connector Cover for Min-D Series (Side Entry) (1)
- ►1800 SERIES 45º ANGLE HEATSHRINK SHAPES WITH RIB (1)
- ►1100 SERIES RIGHT ANGLE HEATSHRINK SHAPES WITHOUT RIB (1)
- ►1100 Series Right Angle Heatshrink Shapes without Rib (VG Style) (1)
- ►1100 SERIES RIGHT ANGLE HEATSHRINK SHAPES WITH RIB (MIL STYLE) (1)
- ►1100 SERIES RIGHT ANGLE HEATSHRINK SHAPES WITH RIB (VG STYLE) (1)
- ►2100 Series Connector Cover for Min-D Series (Side Entry) (1)
- ►Low Profile Right Angle Heatshrink Shapes (4)
- ►2-Way Outlet Shapes (5)
- ►T Shapes (7)
- ►412H 622 to 625 Transition T-90º Heatshrink Shapes Low Profile (1)
- ►1200 Series Off-Set T Heatshrink Shapes (1)
- ►1200 Series Off-Set T Heatshrink Shapes (VG Style) (1)
- ►1200 Series T Heatshrink Shapes (VG Style) (1)
- ►1300 Series 45º Angle T Heatshrink Shapes (VG Style) (1)
- ►1310 Series 30º Angle Double T Heatshrink Shapes (1)
- ►412H 622 to 625 Transition T-90º Heatshrink Shapes Low Profile (1)
- ►Straight Bottle Boots (11)
- ►313C722-774 Convoluted B Heatshrink Shapes (18) (1)
- ►150 Series Bottle Heatshrink Shapes with Rib (VG Style) (110) (1)
- ►● 1750 SERIES GRADUATED STRAIN RELIEF HEATSHRINK SHAPES (1)
- ►1500 Series Connector Cover for Min-D Series (Top Entry) (1)
- ►160 SERIES BOTTLE HEATSHRINK SHAPES WITHOUT RIB (1)
- ►313E445-457 SHIM BOOT HEATSHRINK SHAPES (1)
- ►100 SERIES BOTTLE HEATSHRINK SHAPES WITHOUT RIB (1)
- ►100 SERIES BOTTLE HEATSHRINK SHAPES WITHOUT RIB (THICK WALL) (1)
- ►190 SERIES BOTTLE HEATSHRINK SHAPES WITH EXTERNAL RIBS (VG STYLE) (1)
- ►100 SERIES BOTTLE HEATSHRINK SHAPES WITH RIB (MIL STYLE) (1)
- ►313C722-774 Convoluted B Heatshrink Shapes (18) (1)
- ►Low Profile Straight Boots (6)
- ►Identification Products (7)
- ►TE Connectivity (1)
- ►SumiMark (3)
- ►SumiMark Marking Ribbons (1)
- ►SumiMark Printers (1)
- ►SumiMark Marking Ribbons (1)
- ►TE Connectivity (1)
- ►Lacing Tape (14)
- ►Kevlar Braiding Yarn A-A-55220 (1)
- ►Specialty Glass Tapes (1)
- ►Polyester Braiding Yarn Mil-PRF-572 Type PSTR Form Y (1)
- ►Specialty Nomex Tapes-Rolls Royce ESW 1900 (1)
- ►Glass tape A-A-52083 (Formerly MIL-T-43435 Type IV) (1)
- ►Nomex Braiding Yarn MIL-PRF-572 Type PAA Form Y (1)
- ►Teflon Tape A-A52082 (Formerly Mil-T-43435 Type III) (1)
- ►Waxed Nylon Tape (1)
- ►Specialty Nomex Tapes (1)
- ►Polyester Tape A-A-52081 (Formerly Mil-T-43435 Type II) (1)
- ►Nylon Cord MIL-DTL-713 Type P (Only) (1)
- ►Nomex Lacing Tape A-A-52084 (Formerly Mil-T-43435 Type V) (1)
- ►Nylon Lacing Tape A-A-52080 (Formerly Mil-T-43435 Type I) (1)
- ►Kevlar Braiding Yarn A-A-55220 (1)
- ►Cable Ties MS3367 (1)
- ►Backshells (1)
- ►Belden (1)
- ►Alpha (1)
- ►Boeing Specs (BMS13) (10)
- ►Events (11)
- ►In the Community (6)
- ►Blog (17)
- ►UL Wire (22)
- ►UL (21)
- ►UL (21)
- ►Milspec Cable (6)
- ▼Milspec Tubing (21)
- ▼M23053 (21)
- SAE AS23053 | M23053 (AMS DTL23053) Heat Shrinkable Tubing
- SAE AS23053 | M23053/1 2:1 CL1 Neoprene Heat Shrink Tubing
- SAE AS23053 | M23053/1 2:1 CL2 Neoprene Heat Shrink Tubing
- SAE AS23053 | M23053/4 2.5:1 Adhesive Lined Semi-Rigid Polyolefin Heat Shrink Tubing
- SAE AS23053 | M23053/4 2:1 Polyolefin Adhesive Lined Heat Shrink Tubing
- SAE AS23053 | M23053/5 Class 1 – 2:1 Flame Retardant Irradiated Polyolefin Heat Shrink Tubing
- SAE AS23053 | M23053/5 Class 2 – 2:1 Flame Retardant Irradiated Polyolefin Heat Shrink Tubing
- SAE AS23053 | M23053/5 Class 3 – 2:1 Flame Retardant Irradiated Polyolefin Heat Shrink Tubing
- SAE AS23053 | M23053/6 2:1 CL1 Irradiated Semi-Rigid Polyolefin Heat Shrink Tubing
- SAE AS23053 | M23053/6 2:1 CL2 Irradiated Semi-Rigid Polyolefin Heat Shrink Tubing
- SAE AS23053 | M23053/8 2:1 Kynar Heat Shrink Tubing
- SAE AS23053 | M23053/11 1.3:1 FEP Heat Shrink Tubing
- SAE AS23053 | M23053/11 1.6:1 FEP Heat Shrink Tubing
- SAE AS23053 | M23053/12 2:1 Standard Wall PTFE Heat Shrink Tubing
- SAE AS23053 | M23053/12 2:1 Thin Wall PTFE Heat Shrink Tubing
- SAE AS23053 | M23053/12 2:1 Light Wall PTFE Heat Shrink Tubing
- SAE AS23053 | M23053/12 4:1 Thin Wall PTFE Heat Shrink Tubing
- SAE AS23053 | M23053/13 2:1 Viton Heat Shrink Tubing
- SAE AS23053 | M23053/15 3:1 Adhesive Lined Medium Wall Polyolefin Heat Shrink Tubing
- SAE AS23053 | M23053/16 2:1 Diesel Resistant Polyolefin Heat Shrink Tubing
- SAE AS23053 | M23053/18 2:1 PVDF Clear Heat Shrink Tubing
- ▼M23053 (21)
- ►Milspec Wire (124)
- ►Termination Devices (2)
- ►Uncategorized (1)
- ►Isodyne EMI/RFI Backshells (8)
- ►ARINC Backshells (1)
- ►Circular Backshells (1)
- ►D-Sub Backshells (1)
- ►Splice Kit Backshells (1)
- ►Backshell Connector Designator: M (Mighty Mouse) (1)
- ►Bulk Head Backshells (1)
- ►ARINC Backshells (1)
- ►Vermalloy Secure Voice (1)
- ►Expandable Sleeving (1)
- ►EN Wire and Cable (1)
Warning: Undefined array key 42 in /www/seawireandcable_602/public/wp-content/plugins/collapsing-categories/collapscatlist.php on line 228
Part Number | Shrink Ratio | Size (in) | Expanded I.D. (in) | Recovered I.D. (in) | Nom. Rec. Wall Thick. (in) |
---|---|---|---|---|---|
M23053/8-001 | 2:1 | 3/64 | 0.046 | 0.023 | 0.010 |
M23053/8-002 | 2:1 | 1/16 | 0.063 | 0.032 | 0.010 |
M23053/8-003 | 2:1 | 3/32 | 0.093 | 0.046 | 0.010 |
M23053/8-004 | 2:1 | 1/8 | 0.125 | 0.062 | 0.010 |
M23053/8-005 | 2:1 | 3/16 | 0.187 | 0.093 | 0.010 |
M23053/8-006 | 2:1 | 1/4 | 0.250 | 0.125 | 0.012 |
M23053/8-007 | 2:1 | 3/8 | 0.375 | 0.187 | 0.012 |
M23053/8-008 | 2:1 | 1/2 | 0.500 | 0.250 | 0.012 |
M23053/8-009 | 2:1 | 3/4 | 0.750 | 0.375 | 0.017 |
M23053/8-010 | 2:1 | 1 | 1.000 | 0.500 | 0.018 |
M23053/8-011 | 2:1 | 1 1/2 | 1.500 | 0.750 | 0.020 |